Model: 3i-4214-RC The iSeries 4214 Recurve Bow Case is a mil-spec case and it features a custom foam insert to accommodate the most popular single take-down recurve riser and two sets of limbs Interior Options: Custom Available Colors: Black Interior Dimensions: 41.00″ x 15.00″ x 6.00″

Model: 3i-5014-DB The iSeries 5014 Double Bow Case features a bunk-bed storage system with rigid foam dividers to provide separate compartments with convoluted foam in the lid for stable positioning of two bows or a bow/rifle combination. Interior Options: Bunk Bed Available Colors: Black | Desert Tan | OD Green Interior Dimensions: 50.00″ x 13.50″ [...]

Model: 3i-4217-DB The 3i-4217-DB offers the maximum in protection for two of the wider parallel limb bows like the Mathews Z7 Series bows with a rigid foam bunk-bed system for protection and stable positioning of two bows or a bow/rifle combination. Interior Options: Bunk Bed Available Colors: Black | Desert Tan | OD Green Interior Dimensions: [...]

Model: 3i-3614-PL Offering maximum protection for Parallel Limb Bows, this case features a custom foam insert for secure positioning and cushioning of your gear. New state of the art water-jet cut foam arrow system that holds up to a dozen arrows is included. Interior Options: Custom Available Colors: Black | Pink Interior Dimensions: 35.00″ x 14.00″ [...]

Model: 3i-4214-PL The 3i-4214-PL MIL-STD Injection Molded Parallel Limb Bow case features a completly custom foam insert for secure positioning and cushioning of your bow and a waterjet cut foam arrow system for up to 12 arrows. Interior Options: Custom Available Colors: Black Interior Dimensions: 39.00″ x 13.50″ x 6.00″

Model: 3i-4217-PL MIL-STD Injection Molded Parallel Limb Case features a custom foam insert for secure positioning and cushioning of your gear. New state of the art water-jet cut foam arrow system that holds up to a dozen arrows is included. Interior Options: Custom Available Colors: Black | Desert Tan Interior Dimensions: 41.00″ x 15.50″ x 5.00″

Model: 3i-4217-BDB The iSeries Bowtech Double Bow Case offers the maximum in protection for a combination of bow and rifles, four rifles or two of the wider parallel limb bows made by Bowtech with a rigid foam bunk-bed system for protection and stable positioning and convoluted foam in the lid for secure positioning and cushioning of [...]

Model: 3i-4217-BPL-M The Bowtech 4217 Parallel Limb Bow Case features an EPS Grey Plush interior with Velcro straps for secure positioning and cushioning of your gear. New state of the art water-jet cut foam arrow system that holds up to a dozen arrows is included. Interior Options: Custom Available Colors: OD Green Interior Dimensions: 41.00″ [...]

Model: 3i-5014-PL The iSeries 5014 Target/Long Bow Case features a custom foam insert for secure positioning of your target/long bow up to 48″ in total length and up to a dozen arrows.

Model: 3i-4214-5B-L The iSeries 4214 AR/Short Rifle Case comes equipped with four reinforced padlock locations, cushioned snap-down handles on three (3) sides and recessed, in-line skate style wheels. The interior features a layered foam base and convoluted foam in the lid for secure positioning and cushioning of your gear. Interior Options: Layered Foam Available Colors: Black [...]

Model: 3i-3614-6B-L The iSeries 3614 M4 / Rifle Case is constructed of ultra high-strength polypropylene copolymer resin. The interior features a custom foam base and convoluted foam in the lid for secure positioning and cushioning of your gear. Interior Options: Empty | Layered Foam Available Colors: Black | Desert Tan | OD Green | Pink [...]

Model: 3i-5014-6B-L The iSeries 5014 Long Rifle Case features a bunk-bed storage system with rigid foam dividers to provide separate compartments with convoluted foam in the lid for stable positioning of two bows or a bow/rifle combination. Interior Options: Layered Foam Available Colors: Black | Desert Tan | OD Green Interior Dimensions: 50.00″ x 13.50″ x [...]

Model: 3i-5014-DR The iSeries 5014 Double Rifle Case interior cavity features a fabric lining with molded EPS lid and base liners for structural strength as well as rifle separation. Strategically placed compression foam pads in the bottom and lid of the case prevent rifle movement inside the case. Interior Options: Custom Available Colors: Black | Desert [...]

Model: 3i-4217-DB The 3i-4217-DB offers the maximum in protection for your rifles with a rigid foam bunk-bed system for protection and stable positioning of two rifles or a bow/rifle combination. Interior Options: Bunk Bed Available Colors: Black | Desert Tan | OD Green Interior Dimensions: 40.00″ x 16.00″ x 6.50″

Model: 3i-3614-CB The iSeries 3614 Custom Breakdown Shotgun Case is a waterproof case constructed of ultra high-strength polypropylene resin and it features a custom foam base to accommodate two barrels and one receiver up to 35 inches. In-line skate wheels make transporting your gun around the world both worry and trouble free. Interior Options: Custom Available [...]

Model: 3i-3614-CB-D The iSeries 3614 Double Custom Breakdown Shotgun Case is a waterproof case constructed of ultra high-strength polypropylene resin and it features a custom foam base to accommodate two barrels and two receivers up to 35 inches. In-line skate wheels make transporting your gun around the world both worry and trouble free. Interior Options: [...]

Model: 3i-4217-7B-L The iSeries 4217 AR/Short Rifle Case comes equipped with four reinforced padlock locations, cushioned snap-down handles on three (3) sides and recessed, in-line skate style wheels. The interior features a layered foam base and convoluted foam in the lid for secure positioning and cushioning of your gear. Interior Options: Empty | Layered Foam Available [...]

Model: 3i-4909-SR The 3i-4909-SR Single Rifle case holds scoped rifles up to 49″ long and is part of the iSeries waterproof case line. The interior is made of high quality EPS and ELE convolute foam to ensure a proper compression and protection for your firearm. The 3i-4909-SR measures 49″ x 9″ x 5″ deep and is [...]

Model: 3i-3614-DR The iSeries 3614 Double M4 / Short Rifle Case (3I-3614-DR) offers the maximum in protection for two short rifles or M4 style rifles with a rigid foam bunk-bed system for protection and stable positioning and convoluted foam in the lid for securing and cushioning of your gear. Interior Options: Bunk Bed Available Colors: Black [...]

Model: 3i-1610-5B-L The iSeries 1610 Mil-Spec Pistol Case is injection molded from ultra high-strength polypropylene copolymer resin, material specified by the U.S. military for cases and containers. It features a gasketed, water and dust-tight submersible design, meeting military standard MIL-C-4150J. Interior Options: Cubed Foam | Empty | Layered Foam | Padded Dividers Available Colors: Black [...]

Model: 3i-1813-5B-L iSeries 1813-5 Mil-Spec Pistol Case is capable of accommodating 3-6 handguns with its layered convoluted foam interior. It is resistent to UV, solvents, corrosion, fungus and impact damage, surpassing military standard MIL-STD-810F. The case features a continous molded-in hinge with stainless steel pin. Interior Options: Cubed Foam | Empty | Layered Foam | [...]

Model: 3i-1813-5B-L iSeries 1813-5 Mil-Spec Pistol Case is capable of accommodating 3-6 handguns with its layered convoluted foam interior. It is resistent to UV, solvents, corrosion, fungus and impact damage, surpassing military standard MIL-STD-810F. The case features a continous molded-in hinge with stainless steel pin. Interior Options: Cubed Foam | Empty | Layered Foam | Padded [...]

Model: 3i-1209-4B-L The iSeries 1209 Mil-Spec Pistol Case is a waterproof case perfect for pistols and revolvers and it features a proprietary blend of hi-impact co-polymer polypropylene, a gasketed, water and dust tight submersible design that is resistant to corrosion and impact damage, a continuous molded-in hinge, patent pending “trigger release” latch system, comfortable, a snap-down [...]

Model: 3i-1209-SP The iSeries 1209 Custom Single Pistol Case is a custom waterproof case designed to fit a single pistol along with accessories. The custom interior features an adjustable high density foam with a cutout to fit various pistols (up to 25 different styles) as well as two accessory slots for additional magazines, flashlight, etc. Interior [...]